What people keep running into with engine maintenance
Complaints tagged engine maintenance, each raised by more than one person. One-off posts are not included.
120 recurring problems · 1643 people · 18 forums we read
Raised more than once
Most people first.
- 3What extra parts do I need to replace during an engine teardown?When tearing down an engine for a major repair like a head gasket, knowing which extra gaskets, bolts, and internal components to replace preventatively is difficult without prior experience. This leaves people unsure of what else to order or how to properly inspect parts below the lifters and valves before putting the engine back together.
- 3Can't get the serpentine belt back on the alternator pulleyA hose can prevent you from pulling your wrench down far enough to fully loosen the tensioner. Without enough room to release that tension, you cannot slip the intact belt back over the alternator pulley. This prevents you from charging the system and restoring your failing dash displays and power steering.
- 3Cheapest way to remove a stuck oil filter studTight engine spaces prevent wrenches from fitting, making a socket-based solution the best cheap approach. Because specialized single-use tools are too expensive, some end up just leaving the old filter attached and filling the engine with new oil.
- 3Do smoothed piston bowl edges or small craters need replacement?Rounded, smoothed-out combustion bowl edges or small craters can look like damage even when they feel smooth to a fingernail. The real uncertainty is whether leaving them alone will cause further damage to the pistons or other engine parts. Drivers are left guessing whether to replace the pistons or keep running the engine.
- 2Why is my fresh engine losing oil with no smoke?Fresh engine builds can lose several quarts of oil within minutes without producing any smoke, leaving builders with mystery leaks dripping from pan bolt heads or internal seals. This makes it difficult to track down where the fluid vanished during initial break-in periods or figure out why glittery oil is showing up.
- 2How do you drain oil out of an intercooler?Intercoolers and charge air coolers frequently accumulate pooled oil and oily water that cannot be reached with standard vacuum pumps due to kinks in the boost pipes. This trapped fluid can freeze in cold weather and disrupt normal vehicle operation, such as preventing the car from shifting into higher gears.
- 2How to release tension on a serpentine belt tensionerBeginner car owners often struggle to figure out how to release the tension on a hydraulic serpentine belt tensioner when trying to replace a belt or remove an alternator. Applying too much force or pulling the wrong way can snap the tensioner bolt, leaving the car undrivable and forcing a complete assembly replacement.
- 2Is a minor engine oil leak urgent or can it wait?Engine oil leaks often present as minor seepage around components like the valve cover gasket rather than active dripping. While this issue eventually requires a fix, it is typically non-urgent and can be safely monitored over time without risking immediate engine damage.
- 2How to tell if an engine has blow byExcessive blow-by occurs when combustion gases leak past worn piston rings down into the crankcase, which can be difficult to distinguish from normal engine vibration or running behavior without specific checks. It stops you from accurately diagnosing internal engine wear or knowing whether an older vehicle's motor requires major mechanical repair.
- 2Why is my car blowing oil smoke from the exhaust at startup?Vehicles often blow oil smoke shortly after starting up when they have been sitting for a while, though the smoke typically clears up and stops after about a minute. This momentary surge of smoke points to oil leaking past internal seals or components while parked, which then burns off once the engine runs.
- 2How do I know if replacement car gaskets are correct?Buyers often receive replacement gaskets that differ from original parts and struggle to choose between different material options like cork versus premium rubber without knowing the price-to-performance difference. This uncertainty leaves them questioning whether parts are correct or defective, risking improper installation or leaks during repairs.
- 2Why does my timing belt keep walking off the pulleys?When turning the engine, the timing belt drifts off the camshaft and idler pulleys, eventually pushing the end cap or washer off the crankshaft. This misalignment leaves car owners stuck for days, unsure whether they can safely reassemble the engine without the displaced piece.
- 2Mixed up fuel injector parts after pulling them apartAccidentally disassembling fuel injectors and mixing up their internal components like springs and ball pins makes it impossible to reassemble them correctly, which prevents the engine from starting or running properly. The quotes show that trying to remove injectors by pulling them apart instead of pulling the assembly out causes internal parts to scatter, leaving the owner stranded with a non-starting vehicle.
- 2How do you know if you have carbon buildup?Carbon buildup happens when deposits accumulate inside the engine or intake manifold, and many car owners discover it only after noticing performance concerns or while inspecting for other issues like vacuum leaks. Because symptoms can mimic other problems, determining whether deposits require immediate cleaning or if fuel additives like Techron are enough depends on inspecting the severity of the buildup.
- 2Camshaft timing off by half a tooth after rotating engineAligning the camshaft and crankshaft marks perfectly is often undone when installing the tensioner and rotating the engine shifts the camshaft off by half a tooth. Over-tightening the crank bolt or catching the sprocket can also cause the crank and cam to jump timing. This leaves mechanics stuck, unsure if they must remove the harmonic balancer and belt to individually reset everything to top dead center.
- 2Car bogs down and dies after driving a few minutesUnfiltered air slipping past a loose air intake hose or leaking into the fuel system throws off air-fuel readings, causing reduced power, a check engine light, and the engine to bog and die after a short drive. Drivers worry about whether unfiltered air and dirt caused major engine damage or costly repairs. Checking for loose intake connections or fuel air leaks helps prevent ongoing drivability issues and uncertain repair costs.
- 2New serpentine belt slipping off pulley after replacementA newly installed serpentine belt can slip off a rib or come off completely after a few days or right on startup when a pulley has play or sits misaligned, such as a worn tensioner pulley or a recently replaced power steering pump. Without a clear way to confirm whether the belt or pulley is at fault, owners hesitate to buy another belt or pulley for fear it will fail again.
- 2Will a scratched gasket surface still seal?Prying off a stuck manifold with a bare crowbar often leaves scratches on the metal. Because it is difficult to judge by eye if the damage is deeper than the gasket itself, you are left uncertain if the reassembled parts will actually seal without a second opinion. Frustration usually leads to simply sanding the area a bit and calling it a day.
- 2Is it safe to drive a car leaking gas?Driving with a gas leak is unsafe, as the fuel odor becomes strong enough to smell both inside and outside the vehicle from a distance. This safety risk leaves owners stranded when they need to get the car to a garage for an overhaul but face a long drive and cannot get a tow.
- 2New water pump leaking after replacementA newly installed water pump can leak from improper bolt tightness or a missed part during installation. Without a micrometer torque wrench, it is hard to know whether uneven bolt tension or an overlooked piece is to blame. Water dripping past the unit also makes it tough to tell where the leak starts.
Comes up alongside
Topics that keep appearing on the same problems — not topics with similar names.