LED light stays dimly on when smart switch is off
Replacing a standard switch with a smart single-pole switch, like a Lutron Caseta wireless model, does not always turn the bulbs off completely. The connected LED lights remain dimly lit even when the switch is in the off position.
Core Friction Pattern
Analysis of 2 peer accounts across online developer and community forums reveals that “LED light stays dimly on when smart switch is off” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
LED light stays dimly on when smart switch is off
- 1Replacing the wire nuts with new clamps to rule out a loose or faulty electrical connection.Did this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“I tried to replace this switch with a smart single pole switch, but the LED light remains on, albeit dim, even when the switch is off.”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
Why do LED lights randomly turn off and on?
LED lights often turn off and back on due to thermal overload or failing drivers that shut down when they overheat. This unexpected cycling cuts out light mid-use and can leave you in the dark until the fixture cools down enough to reset.
Why does my outside AC unit keep running when turned off?
When an outdoor unit continues running despite being turned off at the thermostat, a failed or stuck contactor is usually to blame. Because power remains bridged, the only way to stop the system is by manually flipping the exterior switch or breaker.
Why does my car keep running after I turn it off?
When making multiple short stops back-to-back, the engine continues to turn, shake, or stall out instead of shutting down cleanly. This leaves the vehicle unable to start again a few minutes later, often requiring a jump start.
Why is my HVAC fan running when turned off?
Air continues blowing from the indoor vents even when the system is turned off and the fan is set to auto. You can clearly hear this indoor blower running while the large outdoor unit stays completely off. This unexpected airflow usually causes more concern about the system than actual annoyance.
Why is my dishwasher leaking when turned off?
Water can suddenly pour from the bottom or stream from the side vent, flooding the floor even when the unit is unplugged and hasn't been used for days. This unexpected leaking forces you to manually shut off the water supply and scoop out the tub to prevent further damage.
Jeep stuck in park won't turn off
Vehicles falsely detect that they are not in park even when the shifter is physically in position, locking the shifter and refusing to let the ignition turn off. This traps drivers with electronics stuck on and drains the battery while they try to find a workaround.