What people keep running into with interior remodeling
Complaints tagged interior remodeling, each raised by more than one person. One-off posts are not included.
6 recurring problems · 81 people · 4 forums we read
Raised more than once
Most people first.
- 22How to fix a poorly installed floor transition stripBadly installed transition strips leave uneven lips that catch your shoes and create a brand-new tripping hazard. The resulting gaps also trap dirt, cat litter, and excess moisture when you mop the floors.
- 18How to handle floor height differences between roomsDealing with significant height gaps between rooms forces a choice between tearing out existing tile to match levels or bridging the gap with transition strips and leveling compounds. However, standard reducers only support small height differences up to about 15mm, leaving steep transitions or massive 1.5-inch drops in tight doorways without a standard premade fix.
- 16How to transition LVP flooring to a raised fireplace hearthBridging a height difference between luxury vinyl plank flooring and a raised ceramic hearth usually requires a transition strip, even though some prefer a simpler look like caulking or keeping a threshold. The main difficulty is finding the right material and method when heights vary by a fraction of an inch, as standard transition pieces may not look appealing despite being the easiest fix.
- 13How to fix a 3/8 inch gap in tongue and groove flooringWhen tongue and groove flooring installed from different directions ends up misaligned, you are left with an awkward gap and no clear way to connect the remaining boards. This leaves you stuck trying to figure out whether to force a custom-cut piece into place with glue or abandon the installation altogether.
- 11How to install flooring around intricate door trim and moldingInstalling patterned flooring around detailed door jambs, casings, and original plinth blocks requires tedious custom notching and alignment for every single board. This intricate fitting leaves no room for shortcuts and makes maintaining continuous patterns like herringbone a struggle.
- 3How to remove stuck wall molding without ripping the drywallWall molding can be glued on, which risks ripping the drywall paper off and leaving holes to deal with. Because pieces can remain stuck in the wall with no clear way to get them off, beginners are left guessing whether the removal is truly DIY-able or who to call instead.
Comes up alongside
Topics that keep appearing on the same problems — not topics with similar names.