Why is my toilet still leaking from the base after a plumber fixed it?
Water keeps seeping or pooling from the bottom when the underlying issue wasn't resolved or the leak never started at the base. A toilet that rocks or lifts slightly is loose, and a fresh white seal around the bottom can wipe right off when you clean up the water. That leaves water still coming out of the base after the plumber leaves.
Core Friction Pattern
Analysis of 2 peer accounts across online developer and community forums reveals that “Why is my toilet still leaking from the base after a plumber fixed it?” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+5 alternative community-tested workarounds cataloged below.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
Why is my toilet still leaking from the base after a plumber fixed it?
- 1Applying exterior silicone or caulk around the base of the toiletDid this help you?
- 2Checking supply valves, hose connections, and tank-to-bowl boltsDid this help you?
- 3Calling the plumber back to demand a free repair or refundDid this help you?
- 4Pulling and resetting the toilet to replace the wax ring and inspect the flangeDid this help you?
- 5Scrape off and reapply silicone caulk around the baseDid this help you?
- 6Hire a plumber to reset the toilet with a new wax ring and new silicone caulkDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“Had a plumber here for 2 hours who allegedly fixed the problem, but I went to the bathroom about an hour after he left & just now cleaned up all the water that was once again pooling out from the bottom of the toilet 😭”source ↗
“Anyway, plumber put the white seal around the bottom that you can see in the pic, it literally wiped away so easily when I cleaned up the water.”source ↗
“If there’s still water coming out of the base of your toilet then the problem is not fixed, or it was never coming from the base to start with.”source ↗
“Yes, real plumber, professional company & everything! Allegedly!”source ↗
“I’ll check those, but I could see it seeping out from the base after wiping the water away, so I’m pretty sure that’s the source”source ↗
“I’ve noticed the base of my toilet is sort of shiny right where at the floor. I thought it might just need to be cleaned, but it still seems to look that way.”source ↗
“Yes it’s loose. I can lift it up a little bit.”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
How do I find the source of a mysterious bathroom leak?
Water pooling between a vanity and a toilet can leave wood swollen and create confusion over whether the issue stems from the plumbing or the wax ring. Without clear first steps, it is difficult to determine where the water is actually coming from.
Why does my new smart toilet have a weak flush?
A weak flush right after installation usually stems from insufficient water volume entering the bowl or an obstructed trapway. This prevents waste from clearing properly on the first try, often requiring manual water additions to create enough siphon effect.
Water leak from screw after flushing water heater
Flushing a tankless water heater for maintenance can cause a small water leak to develop around a housing screw or union. This usually happens because the screw acts as a penetration through the housing, forcing homeowners to try tightening the fittings themselves or risk calling a technician before the problem worsens.
Why is my toilet overflowing in the middle of the night?
Higher municipal water pressure overnight can cause the water level to rise uncontrollably and flood the floor through the flusher handle or overflow pipe. While lowering the fill valve and overflow pipe stops the immediate mess, it leaves homeowners worried about whether running a lower water line is safe or correct.
Water leaking out of the wall during a shower
Water emerges from multiple locations on the first floor beneath a tub whenever someone takes a shower, often caused by a short, improper CPVC pipe connection. This sudden leak stops normal bathroom use and requires inspecting and repairing the plumbing behind the wall.
Why does my new shower waste constantly smell?
The water seal inside the shower waste is likely failing or set up incorrectly. Without a functioning seal—whether created by a central plastic piece or a pool of water—odors constantly escape from the drain. This missing seal also allows you to hear water flowing when nearby basin taps are turned on.