How to keep upward opening cabinet doors from slamming
You are forced to hold the door open with one hand so it does not slam shut while you try to store items. Fixing this requires a specific part, but finding it is difficult when you do not know the exact term to search for or ask for at the hardware store.
Core Friction Pattern
Analysis of 3 peer accounts across online developer and community forums reveals that “How to keep upward opening cabinet doors from slamming” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+9 alternative community-tested workarounds cataloged below.
What the numbers show
Counted from the threads quoted below. How we count
- People have been saying this in most months since September 2026.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
How to keep upward opening cabinet doors from slamming
- 1Holding the cabinet door open with one hand while storing itemsDid this help you?
- 2Replacing the hinges entirely with doors that open sidewaysDid this help you?
- 3Propping the door open with a heavy blockDid this help you?
- 4Installing a step-release kick-down door stopperDid this help you?
- 5Using a pneumatic storm door closer with a hold-open clipDid this help you?
- 6Installing a delayed action or slow-close door closerDid this help you?
- 7Installing an automatic push-button handicap door openerDid this help you?
- 8Using a hook and eye bolt fastened between the lid and wall or between the lid and chest frameDid this help you?
- 9Cutting a thick dowel to prop between corners of the lid and chest, optionally held with clipsDid this help you?
- 10Using a locking folding cabinet support stayDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“My 20lb chest lid only opens about 70 degrees before it hits the board and batten wall. I need a lid stay and I'm finding mostly soft close struts. Can anyone recommend a good quality lid stay for this angle? I prefer mechanical with a locking mechanism that I can manually release.”source ↗
“the most annoying part of getting our bikes out is dealing with our side door.”source ↗
“Then you need to work to keep the door open while dragging the bike closer. The door is trying to close because we DO want it to close, just not while passing through.”source ↗
“If i go with a 10 or 12 inch, i can actually still have it hidden, installed under the lid and on the frame. I'm just not sure what gauge metal id want for that long of an eye bolt???”source ↗
“Everytime I try to store items into it, I have to keep the door open with one hand as not to slam the door.”source ↗
“I'm not sure what term to google, so if anyone could point me into the right direction before going to the hardware store, it would be greatly appreciated.”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
How to fix cabinets pulling away from the wall
Cabinets frequently pull off wood panel walls or fall to the floor because they were originally held up by simple nails rather than secure mounts. Remounting them is difficult because you cannot easily reach behind the wall to hold a bolt or screw in place while securing the fasteners.
How to keep a self-closing door open just enough for pets
Standard solutions like folded towels often wedge self-closing doors too tightly or allow them to swing completely shut or block air vents. This prevents pets from reliably pushing the door open to walk through while still allowing it to partially close.
Why does my door only close if I slam it?
Doors fail to close smoothly because the latch and strike plate are misaligned or the hinges have shifted. This forces people to push hard, lift, or slam the door just to get it to latch, which causes unnecessary noise and prevents it from shutting securely on its own.
How to open old smoke detector cover to replace battery
Some covers cannot be pried open to replace the battery because the units were ultrasonically welded shut. Other models are held closed by a hidden white cotter pin along the top perimeter that must be slid out first.
How to stop cold drafts coming through a sliding glass door
Poorly sealed or misaligned sliding doors let in freezing air that turns an entire room into an icebox, leaving noticeable gaps even when the door appears closed. This draft makes it impossible to keep the space warm without blocking off adjoining doorways or constantly fighting with faulty hardware.
How to remove a drawer when something is stuck behind it
Objects falling behind a drawer prevent it from shutting fully, but removing the drawer is difficult when the tracks are underneath and lack obvious levers. Trying to bypass the mechanism by unscrewing the rails also fails because the drawer remains connected in the back.