Are my skylights deck mounted or curb mounted?
There is a lack of information on whether existing skylights are deck mounted or curb mounted. This leaves people unable to figure out whether to look from the inside of the skylight or up on the roof.
Core Friction Pattern
Analysis of 3 peer accounts across online developer and community forums reveals that “Are my skylights deck mounted or curb mounted?” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.
+4 alternative community-tested workarounds cataloged below.
What people tried
Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.
Found another way around this?
Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.
Are my skylights deck mounted or curb mounted?
- 1Checking the model numbers on the data plate hidden under the sashDid this help you?
- 2Looking for etched info in the top right corner of the glass while shading the area from the sunDid this help you?
- 3buying a kit to replace it myselfDid this help you?
- 4buy a nicer and more expensive glass skylight that's impact-rated for hurricanesDid this help you?
- 5get the roof patched and remove itDid this help you?
In their words
Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.
“Now I'm trying to find a replacement, and I can't find anything similar to this skylight online.”source ↗
Where this came up
People with this problem also raised
Related community dilemmas clustered by discussion consensus
What is this on my dry verge?
People find unfamiliar objects, growths, and ducts on their dry verge or roof sections without knowing what they are or whether they are safe. This leaves homeowners uncertain about whether the features are harmless things like lichen, necessary exhaust vents, or damaged components that require cleaning or repair.
What are these stains and damage on my attic roof sheathing?
Stains and past carpenter ant damage on new roof sheathing leave homeowners unsure if the roof is structurally compromised or safe. This uncertainty makes it difficult to know whether to file an expensive warranty claim or contractor repair.
Unexplained hole in attic roof decking
Attic roof decking holes can stem from structural damage, previous installation cutouts, moisture rot, or wildlife chewing through the wood. Without identifying the exact cause and severity, homeowners risk leaving active leaks or structural weaknesses unaddressed until they require expensive professional repairs.
Is underlayment required under slate, tile, or thatch roofs?
Slate, tile, and thatch materials are not completely waterproof on their own and allow moisture to pass through joints and gaps. Underlayment serves as the actual primary waterproof barrier beneath these outer coverings, while the outer material functions mainly as UV protection.
Are gaps around replacement skylights normal?
Gaps at the top and bottom of replacement skylights often leave people questioning if the fitment is correct. When planning to cut through a rafter and install headers to finish the opening, nearby fireplace connections can interfere with this standard setup. This structural uncertainty stops people from knowing how to properly finish the framing.
Why is there a weird drop in my ceiling?
Unexplained drops or uneven sections in a ceiling usually conceal structural framing, HVAC ductwork, or plumbing chases. Homeowners cannot safely identify what is hidden inside without inspecting the cavity, which leaves them unable to determine if the drop serves a mechanical purpose or indicates a hidden flaw.