Said It Here

Where is the best place to get a replacement engine or transmission?

When an engine block cracks beyond repair, drivers face the difficult choice between buying a whole new engine and rearranging parts or taking a gamble on an old used part from a scrapyard. This uncertainty leaves them wondering whether transmissions or engines can be reliably rebuilt and how long the process takes.

OverviewLatest thread: Nov 2026
People affected6 accounts (3 forums)
Workarounds found12 items recorded
Discussion timelineSep 2026 – Nov 2026
Freshness statusActive Consensus
Editorial ConsensusSynthesized across r/AskMechanics, r/autorepair, r/MechanicAdvice · Sep 2026 – Nov 2026
Verification standards →

Core Friction Pattern

Analysis of 6 peer accounts across online developer and community forums reveals that “Where is the best place to get a replacement engine or transmission?” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.

Top Peer-Reported Fix
Searching local junkyards

+11 alternative community-tested workarounds cataloged below.

Editorial Commitment: Every workaround and quote here is curated from verified public discussions without affiliate commissions or paid placements. Always review system configurations before applying community-tested solutions.

What the numbers show

Counted from the threads quoted below. How we count

  • People have been saying this in most months since September 2026.

What people tried

Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.

12 items+ Contribute

Found another way around this?

Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.

Active Consensus (Latest: Nov 2026)Indexed across peer discussions from Sep 2026 to Nov 2026
Evaluated against breaking changes & deprecations
  1. 1
    Searching local junkyards
    Did this help you?
  2. 2
    Using online used auto parts aggregators like car-part.com
    Did this help you?
  3. 3
    Buying a whole used engine and swapping parts
    Did this help you?
  4. 4
    Searching scrapyard inventories online using car-part.com
    Did this help you?
  5. 5
    Pulling a transmission yourself at a pick-n-pull yard
    Did this help you?
  6. 6
    Buying a remanufactured transmission online
    Did this help you?
  7. 7
    Having a professional transmission shop rebuild the existing unit
    Did this help you?
  8. 8
    Ordering a part from a slightly different model year that visually matches the correct connection
    Did this help you?
  9. 9
    Consulting multiple online sources and forums for cross-compatibility information
    Did this help you?
  10. 10
    Purchasing third-party remanufactured engines from suppliers like Jasper or Fraser
    Did this help you?
  11. 11
    Sourcing engines from salvage or junk yards
    Did this help you?
  12. 12
    Clarifying differences between rebuilt and remanufactured parts
    Did this help you?
Tried another approach not listed above?+ Share your workaround ↑

In their words

Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.

r/AskMechanics1 person · November 2026

“The engine blew on my 2013 ford e250 (5.4) last week. I’m considering doing an engine swap at the moment but hesitant to go the reman route due to all the horror stories I keep reading online.”source ↗

azzhat420 · r/AskMechanicsNov 2026· 8 upvotes
r/autorepair2 people · November 2026

“It’s been a fun and frustrating experience 🤣”source ↗

Zealousideal_Care215 · r/autorepairNov 2026· 1 upvotes

“Ive been great at repairs it’s just getting a hold of the right parts is FRUSTRATING to say the least”source ↗

Zealousideal_Care215 · r/autorepairNov 2026· 1 upvotes

“The state of parts availbility is abismal for us pros as well.”source ↗

justinh2 · r/autorepairNov 2026· 1 upvotes

“I am in the middle of replacing my rear wheel bearings for my 2014 Toyota Yaris and it seems all the parts that say fit my model in fact do not due to my abs sensor..”source ↗

“I’ve tried other sources for information and I’m not having luck so trying here to see if this can be solved!”source ↗

Zealousideal_Care215 · r/autorepairNov 2026
r/MechanicAdvice3 people · September 2026 – October 2026

“I have an engine block that is cracked so is that able to be replace small part and I got advised by other 2 shop saying that I need to buy whole engine and rearranged the good part and bad parts”source ↗

FrameReasonable1819 · r/MechanicAdviceSep 2026· 1 upvotes

“Want to add to this. I have an engine block is cracked which it is not repairable.”source ↗

FrameReasonable1819 · r/MechanicAdviceSep 2026· 1 upvotes

“I’ll need a new transmission soon but I would love to keep my car. So, I was wondering where the best place to get a new transmission is at. I was thinking of going to the scrapyard or maybe getting one on a website.”source ↗

“But I realize it would kind of be a gamble since it’s a 30 year old trans.”source ↗

fjdjfufydhhdhd · r/MechanicAdviceOct 2026· 1 upvotes

“A 30 year old used one from a scrapyard is a gamble at best assuming you can find one.”source ↗

Equana · r/MechanicAdviceOct 2026· 1 upvotes

“I mean I could give it a shot, I just though auto transmissions are super complicated”source ↗

fjdjfufydhhdhd · r/MechanicAdviceOct 2026· 1 upvotes

“This might be a stupid question but would it be like new after they rebuild it? And how long does it normally take to get it back?”source ↗

fjdjfufydhhdhd · r/MechanicAdviceOct 2026· 1 upvotes

Where this came up

People with this problem also raised

Related community dilemmas clustered by discussion consensus

6 related topics

How to find a replacement car suspension nut

Finding the right replacement part is difficult when you do not know what terms to look up or can only find part numbers for the opposite side of the vehicle. This leaves car owners unsure how to identify and order the exact hardware they need.

8 workarounds4 accounts · 1 forum

How to find engine sensors like the MAP and VVT

Locating specific components like the MAP sensor or 2018 Camry VVT sensors can be difficult under a crowded hood. This struggle prevents car owners from successfully diagnosing engine fault codes and addressing vehicle problems on their own. Knowing the exact position of these sensors is required to move forward with repairs.

5 workarounds3 accounts · 1 forum

What is the hose from the air intake to the valve cover called?

This cracked hose connecting the air intake to the valve cover is typically a PCV or crankcase ventilation hose, which is why oil can leak through the crack. Replacing it is often as simple as disconnecting the old one and putting on a new replacement, though proper identification is essential to finding the right part before ordering.

13 workarounds9 accounts · 2 forums

How to temporarily fix a broken car part until shop appointment

Waiting for a shop appointment with a broken part leaves you needing a safe, stopgap fix to keep the vehicle drivable. Without a reliable temporary solution, drivers are left guessing whether a DIY workaround will hold or cause further damage before they can get professional help.

3 workarounds4 accounts · 1 forum

What extra parts do I need to replace during an engine teardown?

When tearing down an engine for a major repair like a head gasket, knowing which extra gaskets, bolts, and internal components to replace preventatively is difficult without prior experience. This leaves people unsure of what else to order or how to properly inspect parts below the lifters and valves before putting the engine back together.

5 workarounds3 accounts · 1 forum

How to know if a missing engine nut or bolt is important

When a part falls out of the engine bay or a threaded spot looks empty, it is hard to tell whether a missing nut is actually important or what specific replacement to get. Without knowing for sure, drivers are left guessing whether they need to track down a new part or if they can safely ignore it.

6 workarounds4 accounts · 2 forums