Said It Here

Hollow spots and messed up baseboards after new flooring

Some areas feel hollow underneath and sound different after luxury vinyl plank installation, while laminate ends under walls are sometimes cut and stuck together without clicking. Homeowners want to know if these issues indicate faulty contractor work and what can be done before the crew leaves.

OverviewLatest thread: Nov 2026
People affected7 accounts (1 forum)
Workarounds found8 items recorded
Discussion timelineSep 2026 – Nov 2026
Freshness statusActive Consensus
Editorial ConsensusSynthesized across r/Flooring · Sep 2026 – Nov 2026
Verification standards →

Core Friction Pattern

Analysis of 7 peer accounts across online developer and community forums reveals that “Hollow spots and messed up baseboards after new flooring” repeatedly surfaces due to edge-case mismatches between standard defaults and real-world environments. Standard troubleshooting frequently falls short, compelling practitioners to develop custom workarounds.

Top Peer-Reported Fix
Asking online communities to inspect photos or descriptions of the installation work

+7 alternative community-tested workarounds cataloged below.

Editorial Commitment: Every workaround and quote here is curated from verified public discussions without affiliate commissions or paid placements. Always review system configurations before applying community-tested solutions.

What the numbers show

Counted from the threads quoted below. How we count

  • Most of it landed at once — the busiest month was October 2026, with 5 people.

What people tried

Every workaround mentioned in the threads below. We haven’t tested any of them — and nobody here is claiming they worked.

Found another way around this?

Share your steps and trade-offs so fellow engineers don't have to reinvent the wheel. No account required.

Active Consensus (Latest: Nov 2026)Indexed across peer discussions from Sep 2026 to Nov 2026
Evaluated against breaking changes & deprecations
  1. 1
    Asking online communities to inspect photos or descriptions of the installation work
    Did this help you?
  2. 2
    Confronting the contractor to redo the section
    Did this help you?
  3. 3
    Leaving the unclicked seams as they are
    Did this help you?
  4. 4
    Trying to take better photos or videos to check the texture closely
    Did this help you?
  5. 5
    Consulting comments online to see if others recognize the pattern style
    Did this help you?
  6. 6
    Asking online communities for validation
    Did this help you?
  7. 7
    Removing the existing tile entirely
    Did this help you?
  8. 8
    Calling the self-leveler manufacturer for advice
    Did this help you?
Tried another approach not listed above?+ Share your workaround ↑

In their words

Unedited, grouped by where they were said, most upvoted first within each place, each linked to the thread it came from.

r/Flooring7 people · September 2026 – November 2026

“Hiring someone to lay down lvp and this is work day 1 of 2. Im not sure about the process of preparing the surface for lvp but the installer said that he just needed to fill the grout lines of the tile. As someone with no flooring knowledge, does this look sufficient enough to lay lvp?”source ↗

Larry2Hairy · r/FlooringNov 2026· 9 upvotes

“Having contractor install laminate and under this wall, there are two cut ends stuck together without being clicked together. Is that an issue?”source ↗

EternalVirgin98 · r/FlooringOct 2026· 2 upvotes

“It’s the style (which I hate)”source ↗

andmewithoutmytowel · r/FlooringOct 2026· 2 upvotes

“Looks like the wavy lines are meant to be there and the installer did their job pretty well.”source ↗

honkeypot · r/FlooringOct 2026· 2 upvotes

“Looks like shit, but I cannot tell if it is designed to do that or a manufacturing defect.”source ↗

“vinyl gets all wrinkly like that when exposed to heat”source ↗

UMSF_OMEGA · r/FlooringOct 2026· 1 upvotes

“Hence why I made this post because this was not how I expected the prep work to look like.”source ↗

Larry2Hairy · r/FlooringNov 2026· 1 upvotes

“Before they leave I would like a second set of eyes to check their work. Some areas are hollow underneath, the lvp is not moving but it sounds different in some areas, is there’s anything they can do about that? Also why are they messing with my baseboards.”source ↗

ckok30 · r/FlooringSep 2026

“I can see ridges and grey lines from the side of the planks past the color level.”source ↗

Usernamereqd · r/FlooringOct 2026

“There are lips and ridges all over the floor that is supposed to fit flush together”source ↗

Usernamereqd · r/FlooringOct 2026

Where this came up

People with this problem also raised

Related community dilemmas clustered by discussion consensus

6 related topics

Is my finished hardwood floor supposed to look like this?

Homeowners often do not know what specific details to look for to determine if a completed flooring project is normal or poorly executed. This lack of expertise leaves them second-guessing their judgment when they dislike the final finish or notice that the actual board thickness does not match the label on the box. Consequently, they are unable to confidently assess whether the final job meets acceptable quality standards.

7 workarounds5 accounts · 1 forum

How to tell if flooring installation is wrong

Contractors and retailers often defend unconventional installation methods, leaving homeowners unsure if visible flaws, gaps, and creaks are acceptable or require a redo. Second-guessing these methods stops people from confidently confronting installers or demanding fixes before paying thousands for defective work.

25 workarounds13 accounts · 1 forum

Should there be gaps and daylight under installed tiles?

People without tiling terminology cannot evaluate if visible gaps or daylight under tiles are acceptable. Seeing installers spread mortar and press tiles without back buttering leaves them unable to determine if the work is correct. This prevents them from ensuring optimum roof performance and knowing if spaces need to be opened up to let debris pass.

3 workarounds2 accounts · 2 forums

Are gaps in underfloor heating normal?

Underfloor heating installations with visible gaps instead of a completely flush layout leave homeowners questioning the quality of the work. This uncertainty makes it difficult to know whether to accept the setup or be concerned about how it was installed.

2 workarounds2 accounts · 2 forums

How to tell if a carpet installation job was done badly

Poor carpet installation often shows up as protruding plastic, crushed or sparse-looking fibers, and visible staple indents or messy seams. These flaws prevent you from knowing whether the finish is normal or defective, making it difficult to address the issues with the installer.

6 workarounds4 accounts · 1 forum

Is minor up and down movement in LVP flooring normal?

Floating luxury vinyl plank flooring naturally has a slight amount of vertical play because it is not glued down, but snapping noises or developing gaps indicate subfloor unevenness or improper installation clearance. This uncertainty leaves homeowners unable to tell whether minor flex will cause long-term damage or if they need to contact their installer.

2 workarounds4 accounts · 3 forums